You can use a wire pulling lubricant if there’s significant resistance and prevent your wires from kinking up. Once that’s done, just slide the front end into the conduit entrance, and let another person do the pulling on the other end. Electric tape provides that much-needed tension that other tapes can’t, so don’t settle for anything less. To make pulling the wires through the pipes as easy as possible, I recommend bundling the front end as tightly as possible using electric tape. Usually, you’ll have four wires to work with: 2 hots, 1 neutral, and 1 ground. Step 7: Pull the wires through the conduit Once that’s done, position the sub panel correctly then screw it in place. Use the stand-off holes to mark the spots for drilling on the wall before creating the holes for mounting with your drilling tool. ![]() Take note that some panels come with stand-offs that create an air gap this gap will prevent corrosion. They should slide right in snugly every time.Īs for mounting the sub panel, you may not need to mount it with plywood backing on a masonry wall.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |